Borval Floating Ball Valves
FLOATING BALL VALVES
|
Line of Products |
Construction |
Available Sizes |
|
Floating Ball Valves Class 800 and 900/1500 |
Monoblock or Seal Welded |
From ¼” to 2” |
|
Floating Ball Valves Class 800 and 900/1500 |
3 pieces bolted |
From ¼” to 2” |
|
Floating Ball Valves Class 150 and 300 |
Split body or Fully Welded |
From ½” to 8” |
|
Floating Ball Valves Class 600 |
Split body or Fully Welded |
From ½” to 4” |
|
Floating Ball Valves Class 900 and 1500 |
Split body or Fully Welded |
From ½” to 2” |
Valves design to BS5351 (where applicable) and API 6D
Pressure containing components and bolting calculated to ANSI B16.34
All valves fire safe tested and certified to BS 6755 Part 2
All BORVAL MANUFACTURING LLC Ball Valves are available in Full or Reduced Bore executions and in addition:
SW with or without pups, BW (schedule to customer’s requirements) with or without transition pups (class 800 and 9/1500 Floating up to 2”).
NPT, male or female execution (class 800 and 9/1500 Floating up to 2”).
All Flanged end valves are available in RF (125-250 RMS), FF, STOCK or RTJ (oval) and, as an alternative:
- BW ends (schedule to customer’s requirements) with or without pups
- HUB ends
Bare Stem, with wrench operator (where applicable and allowed by torque), with above ground or sub sea gear box and with all types of actuators.
- All kind of inside claddings.
- All kinds of primers or final paints including outside coating by polyurethane (iansub) or similar.
STANDARD PRODUCTION MATERIALS
| Body & Connector(s) |
Stem / Trunnion |
Ball |
Metal Seat Holder |
Soft Seat & Inserts |
Seals & Gaskets |
|
A105N |
A105N+ENP |
A105N+ENP |
A105N+ENP |
PTFE-RTFE |
VITON B |
|
LF2 |
LF2+ENP |
LF2+ENP |
LF2+ENP |
VITON B |
VITON A |
|
LF3 |
F316 (L) |
F316 (L) |
F316 (L) |
NYLON PA12 |
VITON AED |
|
F304 (L) (H) |
F6A (AISI 4140) |
F6A (AISI 4140) |
F6A (AISI 4140) |
NYLON SINVEX SMX |
GRAPHITE |
|
F316 (L) (Ti) |
AISI 4140 |
AISI 4140 |
AISI 4140 |
HNBR |
SWF316-GRAPH. |
|
F321 |
F60 |
F60 |
F60 |
FLUOROLOY |
HNBR |
|
F347 |
17-4-PH |
|
|
PEEK |
KEL-F |
|
|
|
|
|
VESPEL |
BUNAN |
|
|
|
|
|
KEL-F |
|
SPECIAL PRODUCTION MATERIALS
| Body & Connector(s) |
Stem / Trunnion |
Ball |
Metal Seat Holder |
|
Alloy 20 |
Inconel 625 |
Alloy 20 |
Alloy 20 |
|
Inconel 625 |
Inconel 825 |
Inconel 625 |
Inconel 625 |
|
Inconel 825 |
Sanycro 28 |
Inconel 825 |
Inconel 825 |
|
Sanycro 28 |
Hastelloy B-C |
Sanycro 28 |
Sanycro 28 |
|
Hastelloy B-C |
Monel K |
Alu-Bronze |
Alu-Bronze |
|
Alu-Bronze |
F51 |
Monel K |
Monel K |
|
Monel K |
F53-F55-F44 |
F51 |
F51 |
|
Duplex F51 |
Titanium |
F53-F55-F44 |
F53-F55-F44 |
|
Sup.Duplex F53 & F55, F44 |
|
Titanium |
Titanium |
|
Titanium Cl.2 & 5 |
|
CarboTungsten (Metal seated exec.only) |
CarboTungsten (Metal seated exec.only) |
