You are here:
News
News
Valve flow testing suggestions 2010-10-29
I've been tasked with developing a battle plan for a new flow test bench for our various lines of valves and connectors. We make a lot of filler valves, globe & angle valves, safety relief valves, et
Gas Blowby case 2010-10-28
Trying to calculate the gas blowby case flowrate from high pressure separator to low pressure separator.
Valve sizing for flashing liquids 2010-10-28
The proper methodology for sizing a control valve with liquids flashing downstream?Fisher recommends allowable pressure drop method that results in a larger valve than using actual pressure drop.
Stellite on ball 2010-10-28
Supply ON/OFF valve from size 4 up to 24 inch. Application is highly sour (H2S and CO2 and water and also a little CL).
Air Release Valves 2010-10-28
The basic principle behind how ARV's work. However, what exactly are the "Air and Vacuum Flow rate" and the "Automatic Air discharge"? I noticed each is plotted on a graph, but what exactly does it re
Atmospheric pressure effect on a open end pipe 2010-10-28
If you have a valve and oil flowing through it... then you shut off the valve... I assume that most of the oil will stop flowing and the pressure will basically be 0 at the valve and atmosphere at the
Flow measurement 2010-10-27
How to convert liters/minute to cubic feet/hour.This is for natural gas application,Operating temp 18 degrees C,Amb temp - 75 degrees F,Differential pressure 950 psi,Size is 36 inch,Leakage is 68 lite
Floatation material for a float valve 2010-10-27
Dependable float valves are normally supplied complete with float from a number of suppliers.
